MikroTik S-C59DLC40D 1.25G SFP Fibre Transceiver – 40km

Description

The MikroTik S-C59DLC40D is a single-mode fibre optic SFP transceiver designed for Gigabit-class network connectivity over longer distances. It is suitable for compatible MikroTik routers, switches and other networking equipment with an SFP port that supports the module’s specifications.

Available from Globikom in Kenya, this transceiver is intended for network operators, internet service providers, enterprise IT teams and system integrators who need to extend fibre connectivity between network locations.

Long-Distance Single-Mode Fibre Connectivity

The S-C59DLC40D is designed for optical links with a nominal reach of up to 40 km under suitable conditions. This makes it useful for connecting network equipment across campuses, between buildings, at aggregation points or along ISP access and distribution networks.

The actual distance achievable depends on the fibre route, optical loss, connector quality, splices and the specifications of the transceiver at the opposite end. Always check the complete optical link budget before deployment.

1.25 Gbps Data Rate

The module supports a nominal data rate of 1.25 Gbps, making it suitable for compatible Gigabit Ethernet and other supported SFP applications. Confirm that the host equipment supports the required data rate and transceiver type before installation.

The SFP form factor allows the module to be installed in compatible network equipment without replacing the entire router or switch. This can simplify fibre upgrades and maintenance across an existing network.

1590 nm Optical Wavelength

The product designation identifies a nominal operating wavelength of 1590 nm. Optical wavelength and transmitter/receiver specifications must match the requirements of the link and the module installed at the other end.

Before connecting the transceiver, verify the optical specifications and compatibility with the remote module. Do not assume that two SFP transceivers will work together simply because they have the same speed or reach rating.

Duplex LC Fibre Connection

The S-C59DLC40D is designed for a duplex LC fibre connection. It is intended for use with compatible single-mode optical fibre and suitable network equipment.

Use clean fibre connectors and follow correct handling procedures when installing optical modules. Dust, contamination, damaged connectors and excessive fibre attenuation can cause unstable links or prevent a connection from coming up.

Applications in ISP and Enterprise Networks

The MikroTik S-C59DLC40D can be considered for:

• Fibre links between compatible routers and switches.
• ISP distribution and aggregation networks.
• Campus and multi-building network connections.
• Enterprise fibre infrastructure.
• Network expansion where compatible SFP interfaces are available.
• Fibre links requiring a nominal reach of up to 40 km.

Compatibility and Installation

Before purchasing, confirm the host device’s supported SFP specifications, the required optical wavelength, fibre type, connector type and remote-end transceiver. The achievable link distance is dependent on the complete optical path, not just the module’s advertised reach.

Install the transceiver in a compatible SFP port and check the device interface status after connecting the fibre. Follow the host equipment manufacturer’s guidance for supported modules and installation procedures.

Buy MikroTik S-C59DLC40D in Kenya from Globikom

Globikom supplies networking and fibre connectivity equipment for ISPs, businesses and system integrators in Kenya and across Africa. Contact Globikom to confirm availability, compatibility and delivery arrangements for your deployment.

Choose the MikroTik S-C59DLC40D when your network requires a compatible 1.25G SFP fibre transceiver for longer-distance single-mode fibre connectivity.