MikroTik S+31DLC10D 10G SFP+ Fibre Transceiver – 10km

Description

The MikroTik S+31DLC10D is a 10 Gigabit SFP+ optical transceiver designed for high-speed fibre connectivity in compatible networking equipment. It is suitable for network administrators, internet service providers, enterprise IT teams and system integrators who need reliable 10Gbps links between routers, switches and other supported network devices.

Available from Globikom in Kenya, this transceiver can help extend an existing fibre network or provide optical connectivity when deploying compatible MikroTik equipment and other devices that support the module’s specifications.

10 Gigabit Fibre Connectivity

The S+31DLC10D is designed for 10 Gigabit Ethernet applications using a compatible SFP+ interface. It provides a compact optical connection option for high-speed network links without requiring a separate external media converter.

A 10Gbps fibre connection is useful for switch uplinks, router interconnections, server networking, enterprise backbones and ISP infrastructure. Actual throughput and link stability depend on the host equipment, network configuration and quality of the optical path.

Single-Mode Fibre for Longer Links

This transceiver is designed for single-mode fibre and has a nominal reach of up to 10 km under suitable operating conditions. It can be used to connect equipment located in separate rooms, buildings or network distribution points where the fibre route and optical budget support the required distance.

The achievable distance depends on fibre attenuation, connector condition, splices, patch panels and the specifications of the transceiver at the other end. Always assess the complete optical link budget before installation.

1310 nm Wavelength

The S+31DLC10D designation identifies a 1310 nm optical wavelength. The remote transceiver must have compatible optical specifications for the link to operate correctly. Confirm the transmitter and receiver characteristics at both ends before connecting the fibre.

Do not assume that all 10G SFP+ modules are interchangeable. Wavelength, fibre type, connector arrangement, optical power limits and host-device compatibility all matter when selecting a transceiver.

Duplex LC Connector

The module uses a duplex LC fibre connection for compatible optical cabling. Clean connectors carefully before installation, avoid bending fibre below its recommended bend radius and use suitable single-mode patch leads.

Dust, contamination or damaged connectors can increase optical loss and cause intermittent links. Following good fibre-handling practices helps maintain stable network performance.

Suitable Applications

The MikroTik S+31DLC10D can be used in compatible network designs such as:

• 10Gbps switch-to-switch uplinks.
• Router and aggregation-switch interconnections.
• Enterprise fibre backbone links.
• ISP distribution and network aggregation.
• Server and data-network connections.
• Fibre links between buildings or network locations within the supported optical reach.

Compatibility and Installation

Before ordering, check that the host device has a compatible SFP+ port and supports the transceiver’s optical specifications. Confirm the required data rate, wavelength, fibre type, connector type and remote-end module.

Install the transceiver according to the host manufacturer’s instructions and verify the interface status after connecting the fibre. For mission-critical links, check optical signal levels and confirm that the link remains stable under normal traffic.

Buy MikroTik S+31DLC10D in Kenya from Globikom

Globikom supplies networking and fibre connectivity equipment for internet service providers, enterprises and system integrators in Kenya and across Africa. Contact Globikom to confirm availability, device compatibility and delivery arrangements for your project.

Choose the MikroTik S+31DLC10D when you need a compatible 10G SFP+ optical transceiver for single-mode fibre connectivity in a professional network environment.