Ubiquiti UniFi USW-Pro-Max-48-PoE – 48-Port Multi-Gigabit PoE++ Switch with Etherlighting

Description

Ubiquiti USW-Pro-Max-48-PoE is a high-performance UniFi managed switch designed for enterprise networks, internet service providers, hotels, schools, offices and demanding commercial installations. It combines 48 Ethernet ports, multi-gigabit connectivity, PoE+ and PoE++ power delivery, 10G SFP+ uplinks and Etherlighting port identification in a rack-mounted 1U design.

This switch is suitable for organisations that need to connect a large number of wired devices while powering compatible wireless access points, IP cameras, VoIP phones and other network equipment. Its combination of Layer 2 and Layer 3 capabilities supports structured networks with multiple VLANs, inter-VLAN routing and centralised management through the UniFi Network application.

48 Ethernet Ports with Multi-Gigabit Connectivity

The USW-Pro-Max-48-PoE provides 32 Gigabit Ethernet RJ45 ports and 16 2.5 Gigabit Ethernet RJ45 ports. The Gigabit ports support 10/100/1000 Mbps connections, while the 2.5 GbE ports support compatible 2.5 Gbps devices as well as lower Ethernet speeds.

This mix is useful for networks that combine conventional wired devices with higher-bandwidth Wi-Fi 6 and Wi-Fi 7 access points, multi-gigabit workstations and other compatible equipment. It allows administrators to deploy faster access connections where needed without requiring every endpoint to use multi-gigabit Ethernet.

PoE+ and PoE++ Power Delivery

The switch provides 32 PoE+ ports and 16 PoE++ ports, with a total available PoE budget of 720 W. According to the manufacturer, PoE+ ports can supply up to 32 W per port, while PoE++ ports can supply up to 64 W per port, subject to supported standards and the switch’s overall power budget.

Power over Ethernet reduces the need for separate power adapters and electrical outlets near compatible devices. This is particularly useful when installing wireless access points, surveillance cameras and VoIP equipment across offices, hotels, campuses and other large buildings.

When planning an installation, calculate the combined power demand of all connected devices. The individual port ratings do not mean every port can simultaneously deliver its maximum rated output; the total load must remain within the 720 W budget.

Four 10G SFP+ Uplink Ports

Four 10G SFP+ ports provide high-speed uplink connectivity to compatible aggregation switches, routers, servers and fibre infrastructure. They support 1 Gbps and 10 Gbps connections with compatible transceivers or direct-attach cables.

These uplinks can help accommodate traffic from multiple access switches and high-bandwidth devices. Select compatible optical modules and fibre types according to the required link distance and the equipment at the other end.

Etherlighting Port Identification

Ubiquiti Etherlighting provides illuminated port identification when used with compatible equipment and configurations. The lighting can help technicians identify ports and locate connected devices more easily in a rack, reducing the time required for installation, troubleshooting and maintenance.

Layer 3 Managed Networking

The USW-Pro-Max-48-PoE supports managed Layer 2 switching and Layer 3 features, including inter-VLAN routing, static routing for local networks, DHCP server functionality and DHCP relay. These capabilities can help organisations segment traffic and route between supported network subnets.

Additional features include VLAN support, link aggregation, Spanning Tree Protocol, quality of service, IGMP snooping, access control lists, port isolation, traffic controls and network monitoring. The switch supports up to 1,000 VLANs and a MAC address table of 32,000 entries. Feature availability depends on the supported software and configuration.

Switching Performance and Rack Installation

The manufacturer specifies a switching capacity of 224 Gbps, non-blocking throughput of 112 Gbps and a forwarding rate of 167 million packets per second. These capabilities support high-volume switching across enterprise access networks.

The unit measures approximately 442.4 x 400 x 44 mm and occupies one rack unit (1U). It has an internal power supply, supports 100–240 V AC input and provides a DC power backup connection for a compatible UniFi SmartPower RPS system. The specified operating temperature range is -5°C to 40°C.

Buy Ubiquiti USW-Pro-Max-48-PoE in Kenya from Globikom

Globikom supplies networking, connectivity and IT infrastructure equipment for businesses, ISPs, system integrators and resellers in Kenya and across Africa.

Choose the Ubiquiti USW-Pro-Max-48-PoE for deployments requiring 48 Ethernet ports, multi-gigabit access, PoE+ and PoE++ power delivery, 10G fibre uplinks and managed Layer 3 networking. Contact Globikom for current stock confirmation, quotations and delivery options.

For a complete deployment, share the number and type of access points, cameras, phones, switches and uplink connections required. This helps confirm port allocation, PoE capacity and compatibility before ordering.

Specifications are based on manufacturer documentation. Actual network throughput, PoE availability and feature support depend on configuration, connected equipment and software version.

.