MikroTik S+85DLC03D – 10G SFP+ Multimode Fiber Transceiver, 850nm, 300m

Description

The MikroTik S+85DLC03D is a 10 Gigabit SFP+ optical transceiver designed for high-speed data connections over multimode fiber. Operating at an 850nm wavelength, it supports fiber links of up to 300 metres under suitable conditions, making it a practical choice for connecting network switches, routers, servers and other compatible equipment within buildings, server rooms and campus networks.

Available from Globikom in Kenya, this MikroTik fiber transceiver is suitable for internet service providers, enterprise IT teams, data centres and network installers looking for reliable optical connectivity for high-bandwidth infrastructure.

High-Speed 1G and 10G Connectivity

The S+85DLC03D supports 1Gbps and 10Gbps data rates, subject to the capabilities of the host device and the configuration of the link. Its SFP+ form factor allows it to be installed in compatible optical network ports, helping network administrators build or expand fiber connections without replacing equipment that already supports the appropriate interface.

For networks upgrading from Gigabit Ethernet to 10 Gigabit connectivity, this module can help provide higher-capacity links between compatible switches, routers and servers. Confirm that the host device supports the module and the required operating speed before ordering.

850nm Multimode Fiber

This transceiver uses an 850nm optical wavelength and is designed for multimode fiber. It supports connections of up to 300 metres, depending on the fiber type, link quality and equipment at both ends.

The module has a dual LC UPC optical connector. Ensure that your fiber patch cords, cabling infrastructure and remote transceiver match the connector type and multimode requirements. Multimode optics are intended for compatible multimode fiber; they should not be treated as interchangeable with single-mode transceivers.

For a fiber link, both ends must use compatible optical specifications, including wavelength, fiber mode, connector type and supported data rate. Check these details before deployment to help avoid link compatibility issues.

Suitable for ISP and Enterprise Networks

The MikroTik S+85DLC03D can be used in compatible network infrastructure such as:

• ISP and WISP aggregation networks
• 10 Gigabit switch-to-switch connections
• Router-to-switch uplinks
• Server and storage network connections
• Enterprise LAN and campus fiber networks
• Short-distance fiber links within buildings and technical facilities

Its compact plug-in design helps simplify installation in equipment with a compatible SFP+ port. It is also useful when expanding existing fiber infrastructure where the required multimode cabling is already installed.

Compatibility and Deployment

MikroTik lists the S+85DLC03D as tested with selected MikroTik equipment and states that it is also compatible with non-MikroTik SFP devices. However, compatibility depends on the host equipment, firmware, port specifications and vendor requirements. Verify support with your switch, router or server manufacturer before purchasing, particularly when installing third-party optics in enterprise equipment.

For a typical fiber link, install compatible transceivers at both ends, connect the correct multimode fiber patch cord, and check the optical link status on the connected devices. If the link does not come up, verify the connector cleanliness, fiber polarity, cable type, supported speed and device compatibility.

Buy MikroTik S+85DLC03D in Kenya

Globikom supplies networking, connectivity and IT infrastructure products for businesses, ISPs and network installers in Kenya and across Africa. Contact our team to confirm stock availability, compatibility with your equipment and delivery arrangements.

Choose the MikroTik S+85DLC03D when you need a compatible 1G/10G SFP+ transceiver for short-range multimode fiber connectivity. Always confirm the required fiber type, optical connector and link distance before placing your order.

.